数控铣配合零件加工工艺及夹具应用研究

创新创业理论研究与实践 ›› 2020, Vol. 3 ›› Issue (2): 139-140.

数控铣配合零件加工工艺及夹具应用研究

戴小军

桂林航天工业学院,广西桂林 541004

出版日期:2020-01-25 发布日期:2020-05-25
作者简介:戴小军(1975-),男,广西桂林人,本科,工程师,研究方向:数控编程与加工,实践教学。
基金资助:
广西高校机器人与焊接技术重点实验室科学研究项目

Research on Numerical Control Milling with Parts Processing Technology and Fixture Application

DAI Xiaojun

Guilin Institute of Aerospace Technology, Guilin Guangxi, 541004, China

Online:2020-01-25 Published:2020-05-25

摘要/Abstract

摘要： Numerical Control具有较强技术性,而且,目前已被广泛应用于模具的制作及加工等方面,所以,这需要Numerical Control相关人员从根本掌握机械加工技术、数控编程与数控操作技术。文章将以数铣配合零件加工工艺及夹具应用作为切入点,在此基础上予以深入的探究,相关内容如下所述。

关键词: 数铣配合零件, 加工工艺, 夹具应用

Abstract: Numerical Control has a strong technical, and has been widely used in the manufacture and processing of molds, so it needs related personnel to master mechanical processing technology, Numerical Control programming and Numerical Control operation technology. This paper will take the number of milling with parts processing technology and fixture application as a starting point, on the basis of in-depth exploration, the relevant content is described below.

Key words: Digital milling matching parts, Processing technology, Fixture application

中图分类号:

TG547

戴小军. 数控铣配合零件加工工艺及夹具应用研究[J]. 创新创业理论研究与实践, 2020, 3(2): 139-140.

DAI Xiaojun. Research on Numerical Control Milling with Parts Processing Technology and Fixture Application[J]. The Theory and Practice of Innovation and Enntrepreneurship, 2020, 3(2): 139-140.